CARD/1系统在互通立交设计绘图上的应用与开发

通过对CARD/1系统在T型（Y型）互通式立体交叉设计绘图上的二次开发，使T型（Y型）互通式立体交叉的设计绘图达到一体化。     

高压共轨电喷柴油机调速控制策略研究

以高压共轨电喷柴油机为研究对象,对其调速控制策略进行了研究。建立了电喷柴油机的控制模型,并对PID控制和自适应控制进行了仿真比较。结果表明自适应控制具有明显的优势,更适合于高压共轨电喷柴油机速度控制。     

液压驱动工程车辆牵引性能参数在行走机构滑转曲线上的配置与控制方法研究

提出了一种利用液压无级变速传动,进行恒功率速度自适应控制,动态工况下的牵引性能参数按照静态匹配理论计算,但在行走机构全打滑前进行极限负荷控制的设计方法.实践表明这是一种提高车辆动力性、经济性和作业生产率综合性能以及实现自动化的有效途径.     

基于LMS自适应滤波的模糊控制主动悬架研究

以车辆操纵稳定性及行驶平顺性为控制目标，根据路面一车辆系统的特点，提出一种在线可调整的模糊控制算法，利用LMS自适应模块调整模糊控制器的自调整因子，改善单一模糊控制算法对专家先期经验的依赖。针对简化的车辆模型，以路面信号作为激励源，进行悬架系统的振动控制研究，结果表明提出的算法对车辆悬架系统的振动控制具有较好的适应性。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

X80管线钢管的屈强比对其失效评估曲线的影响

X80及以上级别管线钢管的高屈强比是工程应用中的一个突出问题,失效评估曲线是其安全评定的重要依据。文中通过单轴拉伸和断裂韧性试验建立了高屈强比X80管线钢管的特征失效评估图及拟合方程。结果表明：随着钢管屈强比升高,失效评估曲线的截至线（最大载荷比）降低;高、低屈强比钢管的评估曲线在载荷比大于某一临界值时发生分离,且高屈强比钢管的评估曲线处于低屈强比钢管的评估曲线之下;高屈强比钢管的选择3评估曲线比选择1和选择2曲线更偏于安全。     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

动力定位船舶全速度路径跟踪CB导引自适应闭环控制

针对仅使用槽道推进器提供横向推力的动力定位船舶路径跟踪控制问题,建立慢变环境干扰影响下的非线性船舶数学模型,设计带有自适应干扰补偿的反步控制算法来消除环境干扰的影响。引入平行目标接近(CB)导引算法为跟踪控制生成期望速度矢量信号,通过与所提出的自适应反步控制算法相结合,得到不受船舶驱动特性限制的全速度范围动力定位船舶导引跟踪控制算法,应用李雅普诺夫稳定性理论证明系统跟踪误差渐进收敛到零。仿真结果表明通过调整导引算法参数可以调节船舶跟踪过程表现,并可以得到较好的控制精度。     

冰荷载作用下护岸结构数值模拟

季节性冰冻河流春季开江产生的流冰会严重威胁堤防建筑物的安全,开展流冰对结构物的碰撞规律研究十分必要。为此,以松花江汤原县胜利堤护岸结构为例,利用ANSYS/LS-DYNA软件,基于结构地质地形,考虑松花江春季江面开化流冰情况,建立计入冰荷载作用下的护岸结构数值分析模型,开展护岸结构在冰排撞击作用下的有限元分析研究,理清结构承载变化规律,为季节性冰冻地区护岸结构的设计及后期维护提供理论参考和技术支持。     

基于DSP的船舶电力推进系统滤波装置控制器设计

小型船舶电力系统中非线性负载多、谐波污染严重.针对这一情况,本文设计一款基于DSP的电力系统滤波装置控制器,该控制器结构简单,稳定性好,实验证明该控制器能有效降低谐波污染,具有一定实用价值.